Save on shipping and materials with our downloadable F1830 Sit-on -Top kayak plan set. With this purchase, you’ll get a printed set of plans shipped to you.
The 2019 updated F1830 set of plan uses intersect-lines on the hull to speed up the assembly process, plus updated bulkheads that will save some fitting time and save some weight
Included in this plan set is:
- 36″x24″ Architectural D Plan set (2 sheets)
- 24″x 120″ Full-size Templates to be printed on 24″ roll printer (2 sheets)
- 24″x 156″ Full-size Templates to be printed on 24″ roll printer (1 sheet)
- 8-1/2″x11″ Assembly manual
Check out the complete specs of this boat here
To complete this boat you will need:
- 7 sheets of 4mm marine grade plywood
- 1/2 sheet of construction plywood, thickness between 1/4″ and 1/2″
- 19’x3/4″x3/4″[6m x18mm x18mm] (2x) Western red Cedar or similar for sheer clamps
- ±40’x3/4″x1/2″[12m x18mm x12mm] Western Red Cedar or similar for cleats
- 4″x1-1/2″x1-1/2″[100x38x38mm] (6x) Western Red Cedar or similar for scuppers
- 2 gallon [8l] of epoxy laminating resin
- 1 gallon [4l] 2:1 epoxy-activator
- 5Qt [5l] of wood flour
- 20 yards of 4oz/sq.yd. 50″wide Fiberglass cloth
- 75yd 6oz cloth tape x 2″wide
- 20ft carbon tow
- Seats and backrests
- Foot braces
- 6″ Hatch Cover Deck Plate (2x)
- Nylon webbing, bungee chord and hardware
- Varnish and/or paint
*Once you place your order, please allow us about one week to complete your plan set and prepare the shipment.