Included are digital files for:
- 36″x24″ Architectural D Plan set (3 sheets)
- 24″x 120″ Full-size Templates to be printed on 24″ roll printer, mylar or film (2 sheets)
- 24″x 156″ Full-size Templates to be printed on 24″ roll printer, paper (1 sheet)
- 8-1/2″x11″ Assembly manual
Check out the complete specs of this boat here
[hr] [hr][dc]T[/dc]o complete this boat you will need:
- 6 sheets of 4mm marine grade plywood (7 if you use the CNC cut file)
- 1/2 sheet of construction plywood, thickness between 1/4″ and 1/2″
- 19’x3/4″x3/4″[6m x18mm x18mm] (2x) Western red Cedar or similar for sheer clamps
- ±40’x3/4″x1/2″[12m x18mm x12mm] Western Red Cedar or similar for cleats
- 4″x1-1/2″x1-1/2″[100x38x38mm] (6x) Western Red Cedar or similar for scuppers
- 2 gallon [8l] of epoxy laminating resin
- 1 gallon [4l] 2:1 epoxy-activator
- 5Qt [5l] of wood flour
- 20 yards of 4oz/sq.yd. 50″wide Fiberglass cloth
- 75yd 6oz cloth tape x 2″wide
- 20ft carbon tow
- Seats and backrests
- Foot braces
- 6″ Hatch Cover Deck Plate (2x)
- Nylon webbing, bungee chord and hardware
- Varnish and/or paint
Upon completion of the order, you will receive an email from sales@bedardyachtdesign.com titled Your Bedard Yacht Design order from (date) is complete
In this email, in addition to your order details, there is a download link (circled in red in the image below). Clicking on this link will initiate the download of the purchased file.