Our most popular design, the F1430 is a 14ft [4.3m] Sit-On-Top that is comfortable and seaworthy. At 30″ [76cm] wide, it provides ample stability for the paddler when embarking and a sitting position that’s easy on your back.
The updated F1430 plan set uses reference points for positive and fast assembly, lightning holes in the structure to save weight
Included in your digital PDF download:
- 24″x18″ (Arch C) Lines Drawing
- 24″x18″ (Arch C) Outboard Profile & Deck Plan
- 24″x18″ (Arch C) Construction
- 24″x18″ (Arch C) Construction Details
- 24″x18″ (Arch C) Sheathing schedule
- 24″x18″ (Arch C) Panels Layout
- 24″x18″ (Arch C) Temp Frames & Reference Points
- 24″x 15ft Full-size Templates A (print on 24″ roll printer, use mylar or film)
- 24″x 10ft Full-size Templates B (print on 24″ roll printer, use mylar, film or paper)
- 8-1/2″x11″ Assembly manual
Check out the complete specs of this boat here
To complete this boat you will need:
- (4x) 4mm marine grade plywood, 48″x96″ [1220x2440mm]
- (1x) construction plywood 48″x96″ [1220x2440mm]
- (4x) 96″x3/4″x3/4″[2500x18x18mm] Western red Cedar or similar for sheer clamps
- (±20x) 12″x3/4″x1/2″[300x18x12mm] Western Red Cedar or similar for cleats
- (4x) 4″x1-1/2″x1-1/2″[100x38x38mm] Western Red Cedar or similar for scuppers
- 1.5 gallon [6l] of mixed epoxy
- 5Qt [5l] of wood flour
- 10 yards [9m] of 4oz/sq.yd. [135gsm] Fiberglass cloth
- 40yd [36m] 6oz x 2″ [200gsm x 50mm] cloth-tape
- 10ft [3m]carbon tow
- Seat and backrest
- Foot braces
- 6″ Hatch Cover Deck Plate (2x)
- Nylon webbing, bungee chord and hardware
- Varnish and/or paint
Download instructions
Upon completion of the order, you will receive an email from sales@bedardyachtdesign.com titled Your Bedard Yacht Design order from (date) is complete
In this email, in addition to your order details, there is a download link (circled in red in the image below). Clicking on this link will initiate the download of the purchased file.