Ozona Pram Full Size Templates and Assembly Manual

Description

This is the way to go if you have a few sheets of marine plywood leftover from a previous project, or if you live in a place where the price of shipping a kit is prohibitive.

With our full size templates, you’ll receive a roll of 24″ paper with all the plywood panels printed FULL-SIZE, so all you have to do is cut them out or trace them with a tracing wheel.  You’ll also get our assembly manual, full of pictures and tricks to help you put together an Ozona Pram, as well as a 5 sheet 24″x18″ plan set.

3 4’x8′ sheets of Marine-Grade 6mm Plywood (1/4″), you’ll use 2-1/4 of it.

1 4’x8′ sheet of Marine-Grade 9mm Plywood (3/8″), you’ll use 3/4 of it.

Solid mahogany:

(2x) 96″x1/2″x3/4″ Rubrails

(2x) 12″x1″x3/4″ Centerboard Trunk Fwd & Aft Pieces

(1x) 6″x28″x3/4″ Fwd and 2 Aft knees

Epoxy supplies (rough guide only):

1-1/2 Gal. Mixed Epoxy (Such as 1 Gal. resin + 1/2 Gal. Activator)

1/2 Gal. Wood Flour

1 Qt. Micro-Balloons

6 Yd Fiberglass Cloth 6oz x 60″

25 Yards Fiberglass tape 6oz x 3″

The sailing option will get you the full-size templates for the dagger-board, rudder, tiller, mast step, as well as assembly details.  The Ozona Pram uses a regular Optimist rig, so rig details are not included.  The specs to build wooden spars can be had on demand.

For more details and pictures, samples of the plan drawings and more, see the full specs of this design here

Additional information